silux - Software End User License
1. Subject of the License Agreement
The silux 2D Standard - software and any accompanying documentation
(hereinafter referred to collectively as the "Product")
are the property of silux AG., CH-6317 Zug-Oberwil in Switzerland
(hereinafter referred to as the "Licenser"). The
Product is provided to the End User (hereinafter referred
to as "Licensee") free of charge. The Licensee obtains
a personal, non-exclusive and non-transferable right to use
the Product in written or electronic form on a system installed
on the Licensee's premises (hereinafter referred to as "Licensee
System") during an undetermined period of time in the
defined fashion explained below.
2. Permitted Uses
Licensee's use of the Product is limited to: the complete
or partial loading, saving, recording, transferring, running
and replaying of the Product in a computer readable way on
the Licensee System for the purpose of running the Product
instructions for the processing of data belonging to the Licensee,
the temporary establishment of backup copies for such purposes
and the use of documentation in connection with using the
Product in the defined fashion.
3. Expanded Use
Licenses are required for each work station on which the Product
will be used as in Paragraph 2 above. The Product may not
be used on a non-Licensee System.
4. Protected Rights
The Licensee accepts protected rights, especially the copyright
of the Licenser in connection with the Product. The Licensee
will therefore include the protection right remarks on all
full or partial copies of the Product established in connection
with the right of use.
5. Safety Measures
The Licensee will employ all organizational and technical
measures to ensure that the Product is protected from unintentional
dispersal, i.e. access, theft or misuse by unauthorized persons.
Specifically, the Licensee will erase all parts of the Product
before transferring storage media to others. The Licensee,
in addition, will keep an inventory of all backup copies created
in connection with his right of use.
6. Responsibility of the Licensee
The responsibility for the acquisition and maintenance of
a suitable computer system, the choice and installation of
the Product, and the results and simulations derived from
its use, lies with the Licensee. The Licenser cannot guarantee
any of the above.
7. Additional Services
Services in connection with the adaptation of the Product
to special requirements of the Licensee, access to the User
Hotline, training of Licensee personnel, analyses and solutions
for specific mechanical engineering problems and copies of
the printed professional documentation package will be provided
on request, and at prices or fees established by the Licenser.
Such prices or fees are subject to change without notice.
The Licensee may not make or distribute copies of the Product,
or transfer the Product from one hardware product or medium
to another or over a network.
The Licensee may not decompile, reverse engineer, disassemble,
or otherwise reduce the software part of the Product to a
The Licensee may not modify, sell, rent, transfer, resell
for profit, distribute or create derivative works based upon
the Product or any part thereof.
9. Disclaimer of Warranties and of Technical Support
The Product is provided to the Licensee free of charge, and
on an "AS IS" basis without any technical support
or warranty of any kind from the Licenser, unless differently
stipulated within the scope of Paragraph 7.
Nevertheless, the Licenser warrants that the Product is the
latest valid and tested standard version at the time of delivery.
10. Final Stipulation (Governing Law)
This License Agreement shall be governed by the laws of Switzerland.
The agreement of the UN concerning contracts of international
trade of April 11, 1980 is not applicable. The court at the
domicile of the Licenser is the relevant court for all legal
silux 2D Standard End User License Agreement - Legal Disclaimer
- March 1st, 2002
silux is a registered trademark of silux AG in Switzerland
and other countries.
© 1998 - 2002 silux ag